Rose Go
English
English
  • Rose Go User Manual
  • Printer Overview
  • Parts List
  • Printing Process Brief
  • Accessories Installation
  • Print Preparation
  • Finish Printing
    • Printer Setting
    • Changing Filament
    • Model Choosing
    • Take out Model
    • Support Removal
  • Slicer Installation
  • Get Printing Models
  • Slicing Setting
  • Install Cura Slicer
    • Slicer Setup
    • Exporting Model File
    • Slicing Setting
  • Slicing Details
    • Build Plate Adhesion Type
    • Layer Height
    • Infill Density
    • Printing Speed
    • Support
  • Safety Warning
Powered by GitBook
On this page
  • Step 1
  • Step 2
  • Step 3

Was this helpful?

  1. Finish Printing

Model Choosing

PreviousChanging FilamentNextTake out Model

Last updated 4 years ago

Was this helpful?

Step 1

Insert the flash-drive and open the model selection interface (Do not pull out the flash-drive during printing.

Step 2

Select the model you want to print, and start printing (Remember to adjust hot-end up and down to make sure first layer stick well).

Step 3

The screen shows the time and progress of printing.