# Accessories Installation

## **Step 1**

Cut away the two zip ties that are securing the extruder in place.

![](https://58635844-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-MBDtVoMy0hPFtJnLNYV%2F-MBV2NvJFqpwGf6uLFeM%2F-MBV3eH1Mr2w0r4E0uQn%2Fimage.png?alt=media\&token=7ce45419-962d-4605-83dd-d87821adb060)

## **Step 2**

Assemble the spool holder, hold both ends with slight force, align the hole position, and insert the spool holder from the oblique bottom.

![](https://58635844-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-MBDtVoMy0hPFtJnLNYV%2F-MBV2NvJFqpwGf6uLFeM%2F-MBV3hIDUv-uDsZt_yh-%2Fimage.png?alt=media\&token=fba3ed89-3fe8-47b1-86fa-502490baf664)

## **Step 3**

Install the guide tube and insert the guide tube from the tube interface above the extruder.

![](https://58635844-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-MBDtVoMy0hPFtJnLNYV%2F-MBV2NvJFqpwGf6uLFeM%2F-MBV3kZmXOVaPkUct3JI%2Fimage.png?alt=media\&token=fc700209-60e4-4635-b228-6bf6f6b403bb)

## **Step 4**

Insert the fastener into the gap under the tube interface to fasten the guide tube.

![](https://58635844-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-MBDtVoMy0hPFtJnLNYV%2F-MBV2NvJFqpwGf6uLFeM%2F-MBV3pMfeqMeSWkR-b_B%2Fimage.png?alt=media\&token=f914b362-fa40-4895-996d-5a156340d39f)

## **Step 5**

Do the same for the connector at the nozzle.

![](https://58635844-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-MBDtVoMy0hPFtJnLNYV%2F-MBV2NvJFqpwGf6uLFeM%2F-MBV3tTsqDbqGpT8iWDM%2Fimage.png?alt=media\&token=e0a39c8f-835f-4ccc-b288-fc94b3b6a90a)