Rose Go
English
English
  • Rose Go User Manual
  • Printer Overview
  • Parts List
  • Printing Process Brief
  • Accessories Installation
  • Print Preparation
  • Finish Printing
    • Printer Setting
    • Changing Filament
    • Model Choosing
    • Take out Model
    • Support Removal
  • Slicer Installation
  • Get Printing Models
  • Slicing Setting
  • Install Cura Slicer
    • Slicer Setup
    • Exporting Model File
    • Slicing Setting
  • Slicing Details
    • Build Plate Adhesion Type
    • Layer Height
    • Infill Density
    • Printing Speed
    • Support
  • Safety Warning
Powered by GitBook
On this page

Was this helpful?

  1. Install Cura Slicer

Slicing Setting

PreviousExporting Model FileNextSlicing Details

Last updated 4 years ago

Was this helpful?

Click Import model to select the 3D model you want to print (STL format), or directly drag the model into the slicing software.

On the left, you can resize the model parametrically.

Right click the model to open more options, copy, empty and center, and automatically place the model.

After adjusting the model, click the slice button in the lower right corner, and import the slice file. G-code file into the flash drive.

The toolbar on the right can set the slice parameters of the printout. If there is an empty part of the print model, please check the support option.

The suitable printing temperature of PLA is 200℃

The recommended setting range of printing speed is 25mm/s-60mm/s

An introduction to each option can be found later.